Name : ILKI

Unlocking Function :  Key Pad + Semi-Conductor Key


 

 

Unlock the door easily with semi-conductor key

When a user touched the Semi-conductor key at the terminal of the external face ,INNOLOCK will recognize the Semi-conductor key and unlocks the door

Semi-conductor key is activated after registered to INNOLOCK

 

User can unlock the door with Semi-condcutor key or by entering the PIN.

PIN = Personal Identification

User can set INNOLOCK to General Mode or to Security Mode

This increases security a lot

User has countermeasures against lost Semi-conductor key

The lost Semi-conductor keys would be no longer useful ,if user re-registers his remaining Semi-conductor keys at INNOLOCK internal face. User can re-register PIN as well

Patented Ultra power-saving circuit is applied

User can save batteries because INNOLOCK is equipped with patented ultra power-saving circuit. Annually ,battery exchange is needed as installed at home

INNOLOCK has self-diagnostic function

INNOLOCK has self-diagnostic system to check his own defaults and malfunctions. If INNOLOCK finds some system abnormality or non-functioning batteries ,it warns the user by sound

Fire sensor is included

INNOLOCK unlocks the door automatically as it recognizes indoor heat over 60∑C. This function is to secure emergency exit for users

Sensor for burglary is included.

If there are any attempts to enter the wrong PIN more than 3 times ,INNOLOCK will stop all the functions and become dummy for one minute. If there are any attempts to disassemble or to remove the External Face ,INNOLOCK will sound a strong alarm

INNOLOCK has automatic locking function

Users can set INNOLOCK to be locked automatically in 3 seconds after closing the door

Protective Locking Mode

In External Protective Locking mode ,user cannot unlock the door by pressing Lock/Unlock button

Safeguard Alarm Function

Even though user should ensure that door is closed well ,the door might not close perfectly. At that moment ,unlocking the door activates Safeguard Alarm

Emergency Power Supply Terminal

In case of dead batteries no function at all ,in which case to unlock the door ,user should get 9V alkaline battery to contact its terminals to Emergency Power Supply terminals at External Face and should enter PIN or hold RFID Tag key

Mute Function

All other alarms except Safeguard Alarm can be mute

 

 

Descriptions

Specifications

Remarks

Size of External Face

150 x 56 x 16mm [H x W x D]

Zinc Die-casting Zn-2

Size of Internal Face

86 x 140 x 30mm [H x W x D]

Zinc Die-casting Zn-2

Weight

1.2kg

 

Endurable Temperature

-20∑C ~ 80∑C

 

Semi-conductor key

4 keys provided

Up to 20 keys To be registered

PIN (Personal Identification Number)

3~20 digits

Certified MIC

Battery

Alkaline Battery

Changeable at any time by user

Gap of Automatic Locking Sensor

3seconds

For usage of one year based on 10 times using per day

Fire Sensing Temperature

60∑C+10∑C

 

 

 

 

Home

 

 

IP Europe Kft.

www.innolock.eu